Mega 2560 R3 Compatible Board with Arduino Mega 2560


Compare

We program & test all devices with LED blinking Program Arduino in india.
Please make sure to connect the device to USB & test if the LED-“L” is blinking,
This shows the device is working perfectly (Don’t modify program without completing this preliminary test).

775.00

We program & test all devices Arduino in india LED blinking Program.
Please make sure to connect the device to USB & test if the LED-“L” is blinking,
This shows the device is working perfectly (Don’t modify program without completing this preliminary test).

Usage Instructions:

Install CH340 USB Driver (Download:
http://goo.gl/NWEz9O )
Install Arduino IDE (Download: http://arduino.cc/en/Main/Software )
Connect Board to Computer & Launch Arduino IDE.
Select board as “Mega 2560” in Arduino IDE.
Select the COM port (You can know COM Port No. in Control Panel > Device Manager).
Start burning your programs.

Category:
Uses Atmel ATmega2560 Microcontroller
Operating Voltage: 5V
Input Voltage: 7V – 12V
Digital I/O Pins: 54 (15 pins provide PWM output)
Analog Input Pins: 16
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin 50 mA
Flash Memory: 256 KB (8 KB used by bootloader)
SRAM: 8 KB
EEPROM: 4 KB
Clock Speed: 16 MHz
CH340G for USB CommunicationPackage Content:1 X Arduino Mega 2560 R3 Compatible Board with ATmega2560 – CH340G.
1 X USB Cable

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Mega 2560 R3 Compatible Board with Arduino Mega 2560”

There are no reviews yet.